The ID-5x™ fluid dispenser provides automatic, unattended application of abrasive polishing solutions and lubricants. This five (5) position dispenser connects to the back of the MetPrep 3x™ and MetPrep 3x™ grinders/polishers, and is controlled and programmed through the touchscreen. Positions 4 and 5 feature high-speed pumps for dispensing colloidal solutions, and a corrosion resistant magnetic stirring function for use with polishing slurries that normally settle.
The integrated dispenser (ID) features a pivoting manifold mounted on the powerhead to position the dispensing nozzles so liquids clear the sample holder.
More Views
Features
| Five (5) dispensing positions, 16 oz. (500 mL) capacity | Dispenses fluids based on operator's input values (pulses/minute, pulse length) | |
| Provides repeatable fluid dispensing for consistent results | Integrates with MetPrep 3x™ and MetPrep 4x™ grinders/polishers equipped with PH-3™, PH-4™ or PH-6™ powerhead | |
| In-cycle priming that allows temporary "full rate" dispensing during use | Pre-dosing function provides option to "charge" the cloth at the beginning of each cycle | |
| Pump reverse after cycle to prevent dripping/contamination | Positions 4 and 5 offer high speed pumps for oxide polishing, rinse/flush function to eliminate clogging when using oxide solutions, and magnetic stirring for use with non-suspended abrasives | |
| Pulse duration: 0.5 – 6 seconds, 0.1 second increments | Pulse frequency: 1 – 10 per minute | |
| 24 V DC power provided by grinder/polisher | Dims: 8" W x 25" D x 9" H (203 x 635 x 229 mm) | |
| Two (2) year warranty | Designed & manufactured by Allied in the USA | |
| Item # | Description | Qty | |
|---|---|---|---|
| 5-7125 | ID-5x™ Integrated Fluid Dispenser |
