NEW ID-5x™ Fluid Dispenser

Fluid Dispenser

The ID-5x™ fluid dispenser provides automatic, unattended application of abrasive polishing solutions and lubricants. This five (5) position dispenser connects to the back of the MetPrep 3x™ and MetPrep 3x™ grinders/polishers, and is controlled and programmed through the touchscreen. Positions 4 and 5 feature high-speed pumps for dispensing colloidal solutions, and a corrosion resistant magnetic stirring function for use with polishing slurries that normally settle.

The integrated dispenser (ID) features a pivoting manifold mounted on the powerhead to position the dispensing nozzles so liquids clear the sample holder.

More Views


Five (5) dispensing positions, 16 oz. (500 mL) capacity   Dispenses fluids based on operator's input values (pulses/minute, pulse length)
Provides repeatable fluid dispensing for consistent results   Integrates with MetPrep 3x™ and MetPrep 4x™ grinders/polishers equipped with PH-3™, PH-4™ or PH-6™ powerhead
In-cycle priming that allows temporary "full rate" dispensing during use   Pre-dosing function provides option to "charge" the cloth at the beginning of each cycle
Pump reverse after cycle to prevent dripping/contamination   Positions 4 and 5 offer high speed pumps for oxide polishing, rinse/flush function to eliminate clogging when using oxide solutions, and magnetic stirring for use with non-suspended abrasives
Pulse duration: 0.5 – 6 seconds, 0.1 second increments   Pulse frequency: 1 – 10 per minute
24 V DC power provided by grinder/polisher   Dims: 8" W x 25" D x 9" H (203 x 635 x 229 mm)
Two (2) year warranty   Designed & manufactured by Allied in the USA
Item # Description Qty
5-7125 ID-5x™ Integrated Fluid Dispenser